From 94d3e79a8617f88dc0219cfdeedfa3147833719d Mon Sep 17 00:00:00 2001 From: Adrian Kummerlaender Date: Mon, 24 Jun 2019 14:43:36 +0200 Subject: Initialize at openlb-1-3 --- examples/laminar/cylinder3d/cylinder3d.cpp | 363 +++++++++++++++++++++++++++++ 1 file changed, 363 insertions(+) create mode 100644 examples/laminar/cylinder3d/cylinder3d.cpp (limited to 'examples/laminar/cylinder3d/cylinder3d.cpp') diff --git a/examples/laminar/cylinder3d/cylinder3d.cpp b/examples/laminar/cylinder3d/cylinder3d.cpp new file mode 100644 index 0000000..a21c646 --- /dev/null +++ b/examples/laminar/cylinder3d/cylinder3d.cpp @@ -0,0 +1,363 @@ +/* Lattice Boltzmann sample, written in C++, using the OpenLB + * library + * + * Copyright (C) 2011-2013 Mathias J. Krause, Thomas Henn, Tim Dornieden + * E-mail contact: info@openlb.net + * The most recent release of OpenLB can be downloaded at + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +/* cylinder3d.cpp: + * This example examines a steady flow past a cylinder placed in a channel. + * The cylinder is offset somewhat from the center of the flow to make the + * steady-state symmetrical flow unstable. At the inlet, a Poiseuille profile is + * imposed on the velocity, whereas the outlet implements a Dirichlet pressure + * condition set by p = 0. + * Inspired by "Benchmark Computations of Laminar Flow Around + * a Cylinder" by M.Schäfer and S.Turek. For high resolution, low + * latticeU, and enough time to converge, the results for pressure drop, drag + * and lift lie within the estimated intervals for the exact results. + * An unsteady flow with Karman vortex street can be created by changing the + * Reynolds number to Re=100. + * It also shows the usage of the STL-reader and explains how + * to set boundary conditions automatically. + */ + + +#include "olb3D.h" +#ifndef OLB_PRECOMPILED // Unless precompiled version is used, +#include "olb3D.hh" // include full template code +#endif +#include +#include +#include +#include + +using namespace olb; +using namespace olb::descriptors; +using namespace olb::graphics; +using namespace olb::util; +using namespace std; + +typedef double T; +#define DESCRIPTOR D3Q19<> + + +// Parameters for the simulation setup +const int N = 10; // resolution of the model +const T Re = 20.; // Reynolds number +const T maxPhysT = 16.; // max. simulation time in s, SI unit + + +// Stores data from stl file in geometry in form of material numbers +void prepareGeometry( UnitConverter const& converter, IndicatorF3D& indicator, + STLreader& stlReader, SuperGeometry3D& superGeometry ) { + + OstreamManager clout( std::cout,"prepareGeometry" ); + clout << "Prepare Geometry ..." << std::endl; + + superGeometry.rename( 0,2,indicator ); + superGeometry.rename( 2,1,stlReader ); + superGeometry.clean(); + + Vector origin = superGeometry.getStatistics().getMinPhysR( 2 ); + origin[1] += converter.getConversionFactorLength()/2.; + origin[2] += converter.getConversionFactorLength()/2.; + + Vector extend = superGeometry.getStatistics().getMaxPhysR( 2 ); + extend[1] = extend[1]-origin[1]-converter.getConversionFactorLength()/2.; + extend[2] = extend[2]-origin[2]-converter.getConversionFactorLength()/2.; + + // Set material number for inflow + origin[0] = superGeometry.getStatistics().getMinPhysR( 2 )[0]-converter.getConversionFactorLength(); + extend[0] = 2*converter.getConversionFactorLength(); + IndicatorCuboid3D inflow( extend,origin ); + superGeometry.rename( 2,3,inflow ); + + // Set material number for outflow + origin[0] = superGeometry.getStatistics().getMaxPhysR( 2 )[0]-converter.getConversionFactorLength(); + extend[0] = 2*converter.getConversionFactorLength(); + IndicatorCuboid3D outflow( extend,origin ); + superGeometry.rename( 2,4,outflow ); + + // Set material number for cylinder + origin[0] = superGeometry.getStatistics().getMinPhysR( 2 )[0]+converter.getConversionFactorLength(); + extend[0] = ( superGeometry.getStatistics().getMaxPhysR( 2 )[0]-superGeometry.getStatistics().getMinPhysR( 2 )[0] )/2.; + IndicatorCuboid3D cylinder( extend,origin ); + superGeometry.rename( 2,5,cylinder ); + + // Removes all not needed boundary voxels outside the surface + superGeometry.clean(); + superGeometry.checkForErrors(); + + superGeometry.print(); + + clout << "Prepare Geometry ... OK" << std::endl; +} + +// Set up the geometry of the simulation +void prepareLattice( SuperLattice3D& sLattice, + UnitConverter const& converter, + Dynamics& bulkDynamics, + sOnLatticeBoundaryCondition3D& bc, + sOffLatticeBoundaryCondition3D& offBc, + STLreader& stlReader, + SuperGeometry3D& superGeometry ) { + + OstreamManager clout( std::cout,"prepareLattice" ); + clout << "Prepare Lattice ..." << std::endl; + + const T omega = converter.getLatticeRelaxationFrequency(); + + // Material=0 -->do nothing + sLattice.defineDynamics( superGeometry, 0, &instances::getNoDynamics() ); + + // Material=1 -->bulk dynamics + // Material=3 -->bulk dynamics (inflow) + // Material=4 -->bulk dynamics (outflow) + auto bulkIndicator = superGeometry.getMaterialIndicator({1, 3, 4}); + sLattice.defineDynamics( bulkIndicator, &bulkDynamics ); + + // Material=2 -->bounce back + sLattice.defineDynamics( superGeometry, 2, &instances::getBounceBack() ); + + // Setting of the boundary conditions + bc.addVelocityBoundary( superGeometry, 3, omega ); + bc.addPressureBoundary( superGeometry, 4, omega ); + + // Material=5 -->bouzidi + sLattice.defineDynamics( superGeometry, 5, &instances::getNoDynamics() ); + offBc.addZeroVelocityBoundary( superGeometry, 5, stlReader ); + + // Initial conditions + AnalyticalConst3D rhoF( 1 ); + Vector velocityV; + AnalyticalConst3D uF(velocityV); + + // Initialize all values of distribution functions to their local equilibrium + sLattice.defineRhoU( bulkIndicator, rhoF, uF ); + sLattice.iniEquilibrium( bulkIndicator, rhoF, uF ); + + // Make the lattice ready for simulation + sLattice.initialize(); + + clout << "Prepare Lattice ... OK" << std::endl; +} + +// Generates a slowly increasing inflow for the first iTMaxStart timesteps +void setBoundaryValues( SuperLattice3D& sLattice, + UnitConverter const& converter, int iT, + SuperGeometry3D& superGeometry ) { + + OstreamManager clout( std::cout,"setBoundaryValues" ); + + // No of time steps for smooth start-up + int iTmaxStart = converter.getLatticeTime( maxPhysT*0.4 ); + int iTupdate = 30; + + if ( iT%iTupdate == 0 && iT <= iTmaxStart ) { + // Smooth start curve, sinus + // SinusStartScale StartScale(iTmaxStart, T(1)); + + // Smooth start curve, polynomial + PolynomialStartScale StartScale( iTmaxStart, T( 1 ) ); + + // Creates and sets the Poiseuille inflow profile using functors + int iTvec[1] = {iT}; + T frac[1] = {}; + StartScale( frac,iTvec ); + std::vector maxVelocity( 3,0 ); + maxVelocity[0] = 2.25*frac[0]*converter.getCharLatticeVelocity(); + + T distance2Wall = converter.getConversionFactorLength()/2.; + RectanglePoiseuille3D poiseuilleU( superGeometry, 3, maxVelocity, distance2Wall, distance2Wall, distance2Wall ); + sLattice.defineU( superGeometry, 3, poiseuilleU ); + + clout << "step=" << iT << "; maxVel=" << maxVelocity[0] << std::endl; + } +} + +// Computes the pressure drop between the voxels before and after the cylinder +void getResults( SuperLattice3D& sLattice, + UnitConverter const& converter, int iT, + SuperGeometry3D& superGeometry, Timer& timer, + STLreader& stlReader ) { + + OstreamManager clout( std::cout,"getResults" ); + + SuperVTMwriter3D vtmWriter( "cylinder3d" ); + SuperLatticePhysVelocity3D velocity( sLattice, converter ); + SuperLatticePhysPressure3D pressure( sLattice, converter ); + SuperLatticeYplus3D yPlus( sLattice, converter, superGeometry, stlReader, 5 ); + vtmWriter.addFunctor( velocity ); + vtmWriter.addFunctor( pressure ); + vtmWriter.addFunctor( yPlus ); + + const int vtkIter = converter.getLatticeTime( .3 ); + const int statIter = converter.getLatticeTime( .1 ); + + if ( iT==0 ) { + // Writes the geometry, cuboid no. and rank no. as vti file for visualization + SuperLatticeGeometry3D geometry( sLattice, superGeometry ); + SuperLatticeCuboid3D cuboid( sLattice ); + SuperLatticeRank3D rank( sLattice ); + vtmWriter.write( geometry ); + vtmWriter.write( cuboid ); + vtmWriter.write( rank ); + + vtmWriter.createMasterFile(); + } + + // Writes the vtk files + if ( iT%vtkIter == 0 ) { + vtmWriter.write( iT ); + + SuperEuklidNorm3D normVel( velocity ); + BlockReduction3D2D planeReduction( normVel, {0, 0, 1} ); + // write output as JPEG + heatmap::write(planeReduction, iT); + } + + // Writes output on the console + if ( iT%statIter == 0 ) { + // Timer console output + timer.update( iT ); + timer.printStep(); + + // Lattice statistics console output + sLattice.getStatistics().print( iT,converter.getPhysTime( iT ) ); + + // Drag, lift, pressure drop + AnalyticalFfromSuperF3D intpolatePressure( pressure, true ); + SuperLatticePhysDrag3D drag( sLattice, superGeometry, 5, converter ); + + std::vector point1V = superGeometry.getStatistics().getCenterPhysR( 5 ); + std::vector point2V = superGeometry.getStatistics().getCenterPhysR( 5 ); + T point1[3] = {}; + T point2[3] = {}; + for ( int i = 0; i<3; i++ ) { + point1[i] = point1V[i]; + point2[i] = point2V[i]; + } + point1[0] = superGeometry.getStatistics().getMinPhysR( 5 )[0] - converter.getConversionFactorLength(); + point2[0] = superGeometry.getStatistics().getMaxPhysR( 5 )[0] + converter.getConversionFactorLength(); + + T p1, p2; + intpolatePressure( &p1,point1 ); + intpolatePressure( &p2,point2 ); + + clout << "pressure1=" << p1; + clout << "; pressure2=" << p2; + + T pressureDrop = p1-p2; + clout << "; pressureDrop=" << pressureDrop; + + T dragA[3]; + int input1[0]; + drag( dragA, input1 ); + clout << "; drag=" << dragA[0] << "; lift=" << dragA[1] << endl; + + int input[4] = {}; + SuperMax3D yPlusMaxF( yPlus, superGeometry, 1 ); + T yPlusMax[1]; + yPlusMaxF( yPlusMax,input ); + clout << "yPlusMax=" << yPlusMax[0] << endl; + } +} + +int main( int argc, char* argv[] ) { + + // === 1st Step: Initialization === + olbInit( &argc, &argv ); + singleton::directories().setOutputDir( "./tmp/" ); + OstreamManager clout( std::cout,"main" ); + // display messages from every single mpi process + //clout.setMultiOutput(true); + + UnitConverterFromResolutionAndRelaxationTime const converter( + int {N}, // resolution: number of voxels per charPhysL + (T) 0.53, // latticeRelaxationTime: relaxation time, have to be greater than 0.5! + (T) 0.1, // charPhysLength: reference length of simulation geometry + (T) 0.2, // charPhysVelocity: maximal/highest expected velocity during simulation in __m / s__ + (T) 0.2*2.*0.05/Re, // physViscosity: physical kinematic viscosity in __m^2 / s__ + (T) 1.0 // physDensity: physical density in __kg / m^3__ + ); + // Prints the converter log as console output + converter.print(); + // Writes the converter log in a file + converter.write("cylinder3d"); + + + // === 2nd Step: Prepare Geometry === + + // Instantiation of the STLreader class + // file name, voxel size in meter, stl unit in meter, outer voxel no., inner voxel no. + STLreader stlReader( "cylinder3d.stl", converter.getConversionFactorLength(), 0.001 ); + IndicatorLayer3D extendedDomain( stlReader, converter.getConversionFactorLength() ); + + // Instantiation of a cuboidGeometry with weights +#ifdef PARALLEL_MODE_MPI + const int noOfCuboids = singleton::mpi().getSize(); +#else + const int noOfCuboids = 7; +#endif + CuboidGeometry3D cuboidGeometry( extendedDomain, converter.getConversionFactorLength(), noOfCuboids ); + + // Instantiation of a loadBalancer + HeuristicLoadBalancer loadBalancer( cuboidGeometry ); + + // Instantiation of a superGeometry + SuperGeometry3D superGeometry( cuboidGeometry, loadBalancer, 2 ); + + prepareGeometry( converter, extendedDomain, stlReader, superGeometry ); + + // === 3rd Step: Prepare Lattice === + SuperLattice3D sLattice( superGeometry ); + BGKdynamics bulkDynamics( converter.getLatticeRelaxationFrequency(), instances::getBulkMomenta() ); + + // choose between local and non-local boundary condition + sOnLatticeBoundaryCondition3D sBoundaryCondition( sLattice ); + createInterpBoundaryCondition3D( sBoundaryCondition ); + // createLocalBoundaryCondition3D(sBoundaryCondition); + + sOffLatticeBoundaryCondition3D sOffBoundaryCondition( sLattice ); + createBouzidiBoundaryCondition3D ( sOffBoundaryCondition ); + + prepareLattice( sLattice, converter, bulkDynamics, sBoundaryCondition, sOffBoundaryCondition, stlReader, superGeometry ); + + // === 4th Step: Main Loop with Timer === + clout << "starting simulation..." << endl; + Timer timer( converter.getLatticeTime( maxPhysT ), superGeometry.getStatistics().getNvoxel() ); + timer.start(); + + for ( int iT = 0; iT < converter.getLatticeTime( maxPhysT ); ++iT ) { + + // === 5th Step: Definition of Initial and Boundary Conditions === + setBoundaryValues( sLattice, converter, iT, superGeometry ); + + // === 6th Step: Collide and Stream Execution === + sLattice.collideAndStream(); + + // === 7th Step: Computation and Output of the Results === + getResults( sLattice, converter, iT, superGeometry, timer, stlReader ); + } + + timer.stop(); + timer.printSummary(); +} + -- cgit v1.2.3