From 94d3e79a8617f88dc0219cfdeedfa3147833719d Mon Sep 17 00:00:00 2001 From: Adrian Kummerlaender Date: Mon, 24 Jun 2019 14:43:36 +0200 Subject: Initialize at openlb-1-3 --- src/external/tinyxml/MakeHeader | 32 + src/external/tinyxml/changes.txt | 290 ++++ src/external/tinyxml/echo.dsp | 113 ++ src/external/tinyxml/module.mk | 27 + src/external/tinyxml/readme.txt | 530 +++++++ src/external/tinyxml/tinyXmlTest.dsp | 92 ++ src/external/tinyxml/tinyXmlTest.vcproj | 226 +++ src/external/tinyxml/tinyXmlTestSTL.dsp | 92 ++ src/external/tinyxml/tinyXmlTestSTL.vcproj | 225 +++ src/external/tinyxml/tinystr.cpp | 116 ++ src/external/tinyxml/tinystr.h | 359 +++++ src/external/tinyxml/tinyxml.cpp | 1936 +++++++++++++++++++++++++ src/external/tinyxml/tinyxml.dsw | 71 + src/external/tinyxml/tinyxml.h | 2078 ++++++++++++++++++++++++++ src/external/tinyxml/tinyxml.sln | 44 + src/external/tinyxml/tinyxmlSTL.dsp | 126 ++ src/external/tinyxml/tinyxmlSTL.vcproj | 279 ++++ src/external/tinyxml/tinyxml_lib.dsp | 130 ++ src/external/tinyxml/tinyxml_lib.vcproj | 284 ++++ src/external/tinyxml/tinyxmlerror.cpp | 52 + src/external/tinyxml/tinyxmlparser.cpp | 1749 ++++++++++++++++++++++ src/external/tinyxml/utf8test.gif | Bin 0 -> 14812 bytes src/external/tinyxml/utf8test.xml | 11 + src/external/tinyxml/utf8testverify.xml | 11 + src/external/tinyxml/xmltest.cpp | 1378 ++++++++++++++++++ src/external/zlib/adler32.c | 186 +++ src/external/zlib/compress.c | 86 ++ src/external/zlib/crc32.c | 442 ++++++ src/external/zlib/crc32.h | 441 ++++++ src/external/zlib/deflate.c | 2163 ++++++++++++++++++++++++++++ src/external/zlib/deflate.h | 349 +++++ src/external/zlib/gzclose.c | 25 + src/external/zlib/gzguts.h | 218 +++ src/external/zlib/gzlib.c | 637 ++++++++ src/external/zlib/gzread.c | 654 +++++++++ src/external/zlib/gzwrite.c | 665 +++++++++ src/external/zlib/infback.c | 640 ++++++++ src/external/zlib/inffast.c | 323 +++++ src/external/zlib/inffast.h | 11 + src/external/zlib/inffixed.h | 94 ++ src/external/zlib/inflate.c | 1561 ++++++++++++++++++++ src/external/zlib/inflate.h | 125 ++ src/external/zlib/inftrees.c | 304 ++++ src/external/zlib/inftrees.h | 62 + src/external/zlib/module.mk | 88 ++ src/external/zlib/trees.c | 1203 ++++++++++++++++ src/external/zlib/trees.h | 128 ++ src/external/zlib/uncompr.c | 93 ++ src/external/zlib/zconf.h | 534 +++++++ src/external/zlib/zlib.h | 1912 ++++++++++++++++++++++++ src/external/zlib/zutil.c | 325 +++++ src/external/zlib/zutil.h | 271 ++++ 52 files changed, 23791 insertions(+) create mode 100644 src/external/tinyxml/MakeHeader create mode 100644 src/external/tinyxml/changes.txt create mode 100644 src/external/tinyxml/echo.dsp create mode 100644 src/external/tinyxml/module.mk create mode 100644 src/external/tinyxml/readme.txt create mode 100644 src/external/tinyxml/tinyXmlTest.dsp create mode 100644 src/external/tinyxml/tinyXmlTest.vcproj create mode 100644 src/external/tinyxml/tinyXmlTestSTL.dsp create mode 100644 src/external/tinyxml/tinyXmlTestSTL.vcproj create mode 100644 src/external/tinyxml/tinystr.cpp create mode 100644 src/external/tinyxml/tinystr.h create mode 100644 src/external/tinyxml/tinyxml.cpp create mode 100644 src/external/tinyxml/tinyxml.dsw create mode 100644 src/external/tinyxml/tinyxml.h create mode 100644 src/external/tinyxml/tinyxml.sln create mode 100644 src/external/tinyxml/tinyxmlSTL.dsp create mode 100644 src/external/tinyxml/tinyxmlSTL.vcproj create mode 100644 src/external/tinyxml/tinyxml_lib.dsp create mode 100644 src/external/tinyxml/tinyxml_lib.vcproj create mode 100644 src/external/tinyxml/tinyxmlerror.cpp create mode 100644 src/external/tinyxml/tinyxmlparser.cpp create mode 100644 src/external/tinyxml/utf8test.gif create mode 100644 src/external/tinyxml/utf8test.xml create mode 100644 src/external/tinyxml/utf8testverify.xml create mode 100644 src/external/tinyxml/xmltest.cpp create mode 100644 src/external/zlib/adler32.c create mode 100644 src/external/zlib/compress.c create mode 100644 src/external/zlib/crc32.c create mode 100644 src/external/zlib/crc32.h create mode 100644 src/external/zlib/deflate.c create mode 100644 src/external/zlib/deflate.h create mode 100644 src/external/zlib/gzclose.c create mode 100644 src/external/zlib/gzguts.h create mode 100644 src/external/zlib/gzlib.c create mode 100644 src/external/zlib/gzread.c create mode 100644 src/external/zlib/gzwrite.c create mode 100644 src/external/zlib/infback.c create mode 100644 src/external/zlib/inffast.c create mode 100644 src/external/zlib/inffast.h create mode 100644 src/external/zlib/inffixed.h create mode 100644 src/external/zlib/inflate.c create mode 100644 src/external/zlib/inflate.h create mode 100644 src/external/zlib/inftrees.c create mode 100644 src/external/zlib/inftrees.h create mode 100644 src/external/zlib/module.mk create mode 100644 src/external/zlib/trees.c create mode 100644 src/external/zlib/trees.h create mode 100644 src/external/zlib/uncompr.c create mode 100644 src/external/zlib/zconf.h create mode 100644 src/external/zlib/zlib.h create mode 100644 src/external/zlib/zutil.c create mode 100644 src/external/zlib/zutil.h (limited to 'src/external') diff --git a/src/external/tinyxml/MakeHeader b/src/external/tinyxml/MakeHeader new file mode 100644 index 0000000..725efc6 --- /dev/null +++ b/src/external/tinyxml/MakeHeader @@ -0,0 +1,32 @@ +# This file is part of the OpenLB library +# +# Copyright (C) 2007 Mathias Krause +# E-mail contact: info@openlb.net +# The most recent release of OpenLB can be downloaded at +# +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public +# License along with this program; if not, write to the Free +# Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + + +generic := tinyxml \ + tinyxmlerror \ + tinyxmlparser \ + tinystr + +precompiled := tinyxml \ + tinyxmlerror \ + tinyxmlparser \ + tinystr diff --git a/src/external/tinyxml/changes.txt b/src/external/tinyxml/changes.txt new file mode 100644 index 0000000..1ea21ad --- /dev/null +++ b/src/external/tinyxml/changes.txt @@ -0,0 +1,290 @@ +Changes in version 1.0.1: +- Fixed comment tags which were outputing as ' include. Thanks + to Steve Lhomme for that. + +Changes in version 2.0.0 BETA +- Made the ToXXX() casts safe if 'this' is null. + When "LoadFile" is called with a filename, the value will correctly get set. + Thanks to Brian Yoder. +- Fixed bug where isalpha() and isalnum() would get called with a negative value for + high ascii numbers. Thanks to Alesky Aksenov. +- Fixed some errors codes that were not getting set. +- Made methods "const" that were not. +- Added a switch to enable or disable the ignoring of white space. ( TiXmlDocument::SetIgnoreWhiteSpace() ) +- Greater standardization and code re-use in the parser. +- Added a stream out operator. +- Added a stream in operator. +- Entity support, of predefined entites. &#x entities are untouched by input or output. +- Improved text out formatting. +- Fixed ReplaceChild bug, thanks to Tao Chen. + +Changes in version 2.0.1 +- Fixed hanging on loading a 0 length file. Thanks to Jeff Scozzafava. +- Fixed crashing on InsertBeforeChild and InsertAfterChild. Also possibility of bad links being + created by same function. Thanks to Frank De prins. +- Added missing licence text. Thanks to Lars Willemsens. +- Added include, at the suggestion of Steve Walters. + +Changes in version 2.1.0 +- Yves Berquin brings us the STL switch. The forum on SourceForge, and various emails to + me, have long debated all out STL vs. no STL at all. And now you can have it both ways. + TinyXml will compile either way. + +Changes in version 2.1.1 +- Compilation warnings. + +Changes in version 2.1.2 +- Uneeded code is not compiled in the STL case. +- Changed headers so that STL can be turned on or off in tinyxml.h + +Changes in version 2.1.3 +- Fixed non-const reference in API; now uses a pointer. +- Copy constructor of TiXmlString not checking for assignment to self. +- Nimrod Cohen found a truly evil bug in the STL implementation that occurs + when a string is converted to a c_str and then assigned to self. Search for + STL_STRING_BUG for a full description. I'm asserting this is a Microsoft STL + bug, since &string and string.c_str() should never be the same. Nevertheless, + the code works around it. +- Urivan Saaib pointed out a compiler conflict, where the C headers define + the isblank macro, which was wiping out the TiXmlString::isblank() method. + The method was unused and has been removed. + +Changes in version 2.1.4 +- Reworked the entity code. Entities were not correctly surving round trip input and output. + Will now automatically create entities for high ascii in output. + +Changes in version 2.1.5 +- Bug fix by kylotan : infinite loop on some input (tinyxmlparser.cpp rev 1.27) +- Contributed by Ivica Aracic (bytelord) : 1 new VC++ project to compile versions as static libraries (tinyxml_lib.dsp), + and an example usage in xmltest.dsp + (Patch request ID 678605) +- A suggestion by Ronald Fenner Jr (dormlock) to add #include and for Apple's Project Builder + (Patch request ID 697642) +- A patch from ohommes that allows to parse correctly dots in element names and attribute names + (Patch request 602600 and kylotan 701728) +- A patch from hermitgeek ( James ) and wasteland for improper error reporting +- Reviewed by Lee, with the following changes: + - Got sick of fighting the STL/non-STL thing in the windows build. Broke + them out as seperate projects. + - I have too long not included the dsw. Added. + - TinyXmlText had a protected Print. Odd. + - Made LinkEndChild public, with docs and appropriate warnings. + - Updated the docs. + +2.2.0 +- Fixed an uninitialized pointer in the TiXmlAttributes +- Fixed STL compilation problem in MinGW (and gcc 3?) - thanks Brian Yoder for finding this one +- Fixed a syntax error in TiXmlDeclaration - thanks Brian Yoder +- Fletcher Dunn proposed and submitted new error handling that tracked the row and column. Lee + modified it to not have performance impact. +- General cleanup suggestions from Fletcher Dunn. +- In error handling, general errors will no longer clear the error state of specific ones. +- Fix error in documentation : comments starting with ">) has now + been fixed. + +2.5.2 +- Lieven, and others, pointed out a missing const-cast that upset the Open Watcom compiler. + Should now be fixed. +- ErrorRow and ErrorCol should have been const, and weren't. Fixed thanks to Dmitry Polutov. + +2.5.3 +- zloe_zlo identified a missing string specialization for QueryValueAttribute() [ 1695429 ]. Worked + on this bug, but not sure how to fix it in a safe, cross-compiler way. +- increased warning level to 4 and turned on detect 64 bit portability issues for VC2005. + May address [ 1677737 ] VS2005: /Wp64 warnings +- grosheck identified several problems with the Document copy. Many thanks for [ 1660367 ] +- Nice catch, and suggested fix, be Gilad Novik on the Printer dropping entities. + "[ 1600650 ] Bug when printing xml text" is now fixed. +- A subtle fix from Nicos Gollan in the tinystring initializer: + [ 1581449 ] Fix initialiser of TiXmlString::nullrep_ +- Great catch, although there isn't a submitter for the bug. [ 1475201 ] TinyXML parses entities in comments. + Comments should not, in fact, parse entities. Fixed the code path and added tests. +- We were not catching all the returns from ftell. Thanks to Bernard for catching that. + +2.5.4 +- A TiXMLDocument can't be a sub-node. Block this from happening in the 'replace'. Thanks Noam. +- [ 1714831 ] TiXmlBase::location is not copied by copy-ctors, fix reported and suggested by Nicola Civran. +- Fixed possible memory overrun in the comment reading code - thanks gcarlton77 + +2.5.5 +- Alex van der Wal spotted incorrect types (lf) being used in print and scan. robertnestor pointed out some problems with the simple solution. Types updated. +- Johannes Hillert pointed out some bug typos. +- Christian Mueller identified inconsistent error handling with Attributes. +- olivier barthelemy also reported a problem with double truncation, also related to the %lf issue. +- zaelsius came up with a great (and simple) suggestion to fix QueryValueAttribute truncating strings. +- added some null pointer checks suggested by hansenk +- Sami Väisänen found a (rare) buffer overrun that could occur in parsing. +- vi tri filed a bug that led to a refactoring of the attribute setting mess (as well as adding a missing SetDoubleAttribute() ) +- removed TIXML_ERROR_OUT_OF_MEMORY. TinyXML does not systematically address OOO, and the notion it does is misleading. +- vanneto, keithmarshall, others all reported the warning from IsWhiteSpace() usage. Cleaned this up - many thanks to everyone who reported this one. +- tibur found a bug in end tag parsing + + + + diff --git a/src/external/tinyxml/echo.dsp b/src/external/tinyxml/echo.dsp new file mode 100644 index 0000000..d81db12 --- /dev/null +++ b/src/external/tinyxml/echo.dsp @@ -0,0 +1,113 @@ +# Microsoft Developer Studio Project File - Name="echo" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=echo - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "echo.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "echo.mak" CFG="echo - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "echo - Win32 Release" (based on "Win32 (x86) Console Application") +!MESSAGE "echo - Win32 Debug" (based on "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe + +!IF "$(CFG)" == "echo - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "echoRelease" +# PROP Intermediate_Dir "echoRelease" +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c +# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "TIXML_USE_STL" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "echo - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "echo___Win32_Debug" +# PROP BASE Intermediate_Dir "echo___Win32_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "echoDebug" +# PROP Intermediate_Dir "echoDebug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c +# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "TIXML_USE_STL" /FR /YX /FD /GZ /c +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "echo - Win32 Release" +# Name "echo - Win32 Debug" +# Begin Source File + +SOURCE=.\xmltester\bugtest.cpp +# End Source File +# Begin Source File + +SOURCE=.\tinystr.cpp +# End Source File +# Begin Source File + +SOURCE=.\tinystr.h +# End Source File +# Begin Source File + +SOURCE=.\tinyxml.cpp +# End Source File +# Begin Source File + +SOURCE=.\tinyxml.h +# End Source File +# Begin Source File + +SOURCE=.\tinyxmlerror.cpp +# End Source File +# Begin Source File + +SOURCE=.\tinyxmlparser.cpp +# End Source File +# End Target +# End Project diff --git a/src/external/tinyxml/module.mk b/src/external/tinyxml/module.mk new file mode 100644 index 0000000..6e42e3e --- /dev/null +++ b/src/external/tinyxml/module.mk @@ -0,0 +1,27 @@ +# This file is part of the OpenLB library +# +# Copyright (C) 2017 Markus Mohrhard +# E-mail contact: info@openlb.net +# The most recent release of OpenLB can be downloaded at +# +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public +# License along with this program; if not, write to the Free +# Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +current_dir := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))) + +include $(addsuffix /MakeHeader, $(current_dir)) + +LIB_OBJECTS += $(foreach file, $($(BUILDTYPE)), $(OBJDIR)/$(current_dir)$(file).o) diff --git a/src/external/tinyxml/readme.txt b/src/external/tinyxml/readme.txt new file mode 100644 index 0000000..89d9e8d --- /dev/null +++ b/src/external/tinyxml/readme.txt @@ -0,0 +1,530 @@ +/** @mainpage + +

TinyXML

+ +TinyXML is a simple, small, C++ XML parser that can be easily +integrated into other programs. + +

What it does.

+ +In brief, TinyXML parses an XML document, and builds from that a +Document Object Model (DOM) that can be read, modified, and saved. + +XML stands for "eXtensible Markup Language." It allows you to create +your own document markups. Where HTML does a very good job of marking +documents for browsers, XML allows you to define any kind of document +markup, for example a document that describes a "to do" list for an +organizer application. XML is a very structured and convenient format. +All those random file formats created to store application data can +all be replaced with XML. One parser for everything. + +The best place for the complete, correct, and quite frankly hard to +read spec is at +http://www.w3.org/TR/2004/REC-xml-20040204/. An intro to XML +(that I really like) can be found at +http://skew.org/xml/tutorial. + +There are different ways to access and interact with XML data. +TinyXML uses a Document Object Model (DOM), meaning the XML data is parsed +into a C++ objects that can be browsed and manipulated, and then +written to disk or another output stream. You can also construct an XML document +from scratch with C++ objects and write this to disk or another output +stream. + +TinyXML is designed to be easy and fast to learn. It is two headers +and four cpp files. Simply add these to your project and off you go. +There is an example file - xmltest.cpp - to get you started. + +TinyXML is released under the ZLib license, +so you can use it in open source or commercial code. The details +of the license are at the top of every source file. + +TinyXML attempts to be a flexible parser, but with truly correct and +compliant XML output. TinyXML should compile on any reasonably C++ +compliant system. It does not rely on exceptions or RTTI. It can be +compiled with or without STL support. TinyXML fully supports +the UTF-8 encoding, and the first 64k character entities. + + +

What it doesn't do.

+ +TinyXML doesn't parse or use DTDs (Document Type Definitions) or XSLs +(eXtensible Stylesheet Language.) There are other parsers out there +(check out www.sourceforge.org, search for XML) that are much more fully +featured. But they are also much bigger, take longer to set up in +your project, have a higher learning curve, and often have a more +restrictive license. If you are working with browsers or have more +complete XML needs, TinyXML is not the parser for you. + +The following DTD syntax will not parse at this time in TinyXML: + +@verbatim + + ]> +@endverbatim + +because TinyXML sees this as a !DOCTYPE node with an illegally +embedded !ELEMENT node. This may be addressed in the future. + +

Tutorials.

+ +For the impatient, here is a tutorial to get you going. A great way to get started, +but it is worth your time to read this (very short) manual completely. + +- @subpage tutorial0 + +

Code Status.

+ +TinyXML is mature, tested code. It is very stable. If you find +bugs, please file a bug report on the sourceforge web site +(www.sourceforge.net/projects/tinyxml). We'll get them straightened +out as soon as possible. + +There are some areas of improvement; please check sourceforge if you are +interested in working on TinyXML. + +

Related Projects

+ +TinyXML projects you may find useful! (Descriptions provided by the projects.) + +
    +
  • TinyXPath (http://tinyxpath.sourceforge.net). TinyXPath is a small footprint + XPath syntax decoder, written in C++.
    • +
  • TinyXML++ (http://code.google.com/p/ticpp/). TinyXML++ is a completely new + interface to TinyXML that uses MANY of the C++ strengths. Templates, + exceptions, and much better error handling.
    • +
+ +

Features

+ +

Using STL

+ +TinyXML can be compiled to use or not use STL. When using STL, TinyXML +uses the std::string class, and fully supports std::istream, std::ostream, +operator<<, and operator>>. Many API methods have both 'const char*' and +'const std::string&' forms. + +When STL support is compiled out, no STL files are included whatsoever. All +the string classes are implemented by TinyXML itself. API methods +all use the 'const char*' form for input. + +Use the compile time #define: + + TIXML_USE_STL + +to compile one version or the other. This can be passed by the compiler, +or set as the first line of "tinyxml.h". + +Note: If compiling the test code in Linux, setting the environment +variable TINYXML_USE_STL=YES/NO will control STL compilation. In the +Windows project file, STL and non STL targets are provided. In your project, +It's probably easiest to add the line "#define TIXML_USE_STL" as the first +line of tinyxml.h. + +

UTF-8

+ +TinyXML supports UTF-8 allowing to manipulate XML files in any language. TinyXML +also supports "legacy mode" - the encoding used before UTF-8 support and +probably best described as "extended ascii". + +Normally, TinyXML will try to detect the correct encoding and use it. However, +by setting the value of TIXML_DEFAULT_ENCODING in the header file, TinyXML +can be forced to always use one encoding. + +TinyXML will assume Legacy Mode until one of the following occurs: +
    +
  1. If the non-standard but common "UTF-8 lead bytes" (0xef 0xbb 0xbf) + begin the file or data stream, TinyXML will read it as UTF-8.
    2. +
  2. If the declaration tag is read, and it has an encoding="UTF-8", then + TinyXML will read it as UTF-8.
    3. +
  3. If the declaration tag is read, and it has no encoding specified, then TinyXML will + read it as UTF-8.
    4. +
  4. If the declaration tag is read, and it has an encoding="something else", then TinyXML + will read it as Legacy Mode. In legacy mode, TinyXML will work as it did before. It's + not clear what that mode does exactly, but old content should keep working.
    5. +
  5. Until one of the above criteria is met, TinyXML runs in Legacy Mode.
    6. +
+ +What happens if the encoding is incorrectly set or detected? TinyXML will try +to read and pass through text seen as improperly encoded. You may get some strange results or +mangled characters. You may want to force TinyXML to the correct mode. + +You may force TinyXML to Legacy Mode by using LoadFile( TIXML_ENCODING_LEGACY ) or +LoadFile( filename, TIXML_ENCODING_LEGACY ). You may force it to use legacy mode all +the time by setting TIXML_DEFAULT_ENCODING = TIXML_ENCODING_LEGACY. Likewise, you may +force it to TIXML_ENCODING_UTF8 with the same technique. + +For English users, using English XML, UTF-8 is the same as low-ASCII. You +don't need to be aware of UTF-8 or change your code in any way. You can think +of UTF-8 as a "superset" of ASCII. + +UTF-8 is not a double byte format - but it is a standard encoding of Unicode! +TinyXML does not use or directly support wchar, TCHAR, or Microsoft's _UNICODE at this time. +It is common to see the term "Unicode" improperly refer to UTF-16, a wide byte encoding +of unicode. This is a source of confusion. + +For "high-ascii" languages - everything not English, pretty much - TinyXML can +handle all languages, at the same time, as long as the XML is encoded +in UTF-8. That can be a little tricky, older programs and operating systems +tend to use the "default" or "traditional" code page. Many apps (and almost all +modern ones) can output UTF-8, but older or stubborn (or just broken) ones +still output text in the default code page. + +For example, Japanese systems traditionally use SHIFT-JIS encoding. +Text encoded as SHIFT-JIS can not be read by TinyXML. +A good text editor can import SHIFT-JIS and then save as UTF-8. + +The Skew.org link does a great +job covering the encoding issue. + +The test file "utf8test.xml" is an XML containing English, Spanish, Russian, +and Simplified Chinese. (Hopefully they are translated correctly). The file +"utf8test.gif" is a screen capture of the XML file, rendered in IE. Note that +if you don't have the correct fonts (Simplified Chinese or Russian) on your +system, you won't see output that matches the GIF file even if you can parse +it correctly. Also note that (at least on my Windows machine) console output +is in a Western code page, so that Print() or printf() cannot correctly display +the file. This is not a bug in TinyXML - just an OS issue. No data is lost or +destroyed by TinyXML. The console just doesn't render UTF-8. + + +

Entities

+TinyXML recognizes the pre-defined "character entities", meaning special +characters. Namely: + +@verbatim + & & + < < + > > + " " + ' ' +@endverbatim + +These are recognized when the XML document is read, and translated to there +UTF-8 equivalents. For instance, text with the XML of: + +@verbatim + Far & Away +@endverbatim + +will have the Value() of "Far & Away" when queried from the TiXmlText object, +and will be written back to the XML stream/file as an ampersand. Older versions +of TinyXML "preserved" character entities, but the newer versions will translate +them into characters. + +Additionally, any character can be specified by its Unicode code point: +The syntax " " or " " are both to the non-breaking space characher. + +

Printing

+TinyXML can print output in several different ways that all have strengths and limitations. + +- Print( FILE* ). Output to a std-C stream, which includes all C files as well as stdout. + - "Pretty prints", but you don't have control over printing options. + - The output is streamed directly to the FILE object, so there is no memory overhead + in the TinyXML code. + - used by Print() and SaveFile() + +- operator<<. Output to a c++ stream. + - Integrates with standart C++ iostreams. + - Outputs in "network printing" mode without line breaks. Good for network transmission + and moving XML between C++ objects, but hard for a human to read. + +- TiXmlPrinter. Output to a std::string or memory buffer. + - API is less concise + - Future printing options will be put here. + - Printing may change slightly in future versions as it is refined and expanded. + +

Streams

+With TIXML_USE_STL on TinyXML supports C++ streams (operator <<,>>) streams as well +as C (FILE*) streams. There are some differences that you may need to be aware of. + +C style output: + - based on FILE* + - the Print() and SaveFile() methods + + Generates formatted output, with plenty of white space, intended to be as + human-readable as possible. They are very fast, and tolerant of ill formed + XML documents. For example, an XML document that contains 2 root elements + and 2 declarations, will still print. + +C style input: + - based on FILE* + - the Parse() and LoadFile() methods + + A fast, tolerant read. Use whenever you don't need the C++ streams. + +C++ style output: + - based on std::ostream + - operator<< + + Generates condensed output, intended for network transmission rather than + readability. Depending on your system's implementation of the ostream class, + these may be somewhat slower. (Or may not.) Not tolerant of ill formed XML: + a document should contain the correct one root element. Additional root level + elements will not be streamed out. + +C++ style input: + - based on std::istream + - operator>> + + Reads XML from a stream, making it useful for network transmission. The tricky + part is knowing when the XML document is complete, since there will almost + certainly be other data in the stream. TinyXML will assume the XML data is + complete after it reads the root element. Put another way, documents that + are ill-constructed with more than one root element will not read correctly. + Also note that operator>> is somewhat slower than Parse, due to both + implementation of the STL and limitations of TinyXML. + +

White space

+The world simply does not agree on whether white space should be kept, or condensed. +For example, pretend the '_' is a space, and look at "Hello____world". HTML, and +at least some XML parsers, will interpret this as "Hello_world". They condense white +space. Some XML parsers do not, and will leave it as "Hello____world". (Remember +to keep pretending the _ is a space.) Others suggest that __Hello___world__ should become +Hello___world. + +It's an issue that hasn't been resolved to my satisfaction. TinyXML supports the +first 2 approaches. Call TiXmlBase::SetCondenseWhiteSpace( bool ) to set the desired behavior. +The default is to condense white space. + +If you change the default, you should call TiXmlBase::SetCondenseWhiteSpace( bool ) +before making any calls to Parse XML data, and I don't recommend changing it after +it has been set. + + +

Handles

+ +Where browsing an XML document in a robust way, it is important to check +for null returns from method calls. An error safe implementation can +generate a lot of code like: + +@verbatim +TiXmlElement* root = document.FirstChildElement( "Document" ); +if ( root ) +{ + TiXmlElement* element = root->FirstChildElement( "Element" ); + if ( element ) + { + TiXmlElement* child = element->FirstChildElement( "Child" ); + if ( child ) + { + TiXmlElement* child2 = child->NextSiblingElement( "Child" ); + if ( child2 ) + { + // Finally do something useful. +@endverbatim + +Handles have been introduced to clean this up. Using the TiXmlHandle class, +the previous code reduces to: + +@verbatim +TiXmlHandle docHandle( &document ); +TiXmlElement* child2 = docHandle.FirstChild( "Document" ).FirstChild( "Element" ).Child( "Child", 1 ).ToElement(); +if ( child2 ) +{ + // do something useful +@endverbatim + +Which is much easier to deal with. See TiXmlHandle for more information. + + +

Row and Column tracking

+Being able to track nodes and attributes back to their origin location +in source files can be very important for some applications. Additionally, +knowing where parsing errors occured in the original source can be very +time saving. + +TinyXML can tracks the row and column origin of all nodes and attributes +in a text file. The TiXmlBase::Row() and TiXmlBase::Column() methods return +the origin of the node in the source text. The correct tabs can be +configured in TiXmlDocument::SetTabSize(). + + +

Using and Installing

+ +To Compile and Run xmltest: + +A Linux Makefile and a Windows Visual C++ .dsw file is provided. +Simply compile and run. It will write the file demotest.xml to your +disk and generate output on the screen. It also tests walking the +DOM by printing out the number of nodes found using different +techniques. + +The Linux makefile is very generic and runs on many systems - it +is currently tested on mingw and +MacOSX. You do not need to run 'make depend'. The dependecies have been +hard coded. + +

Windows project file for VC6

+
    +
  • tinyxml: tinyxml library, non-STL
    • +
  • tinyxmlSTL: tinyxml library, STL
    • +
  • tinyXmlTest: test app, non-STL
    • +
  • tinyXmlTestSTL: test app, STL
    • +
+ +

Makefile

+At the top of the makefile you can set: + +PROFILE, DEBUG, and TINYXML_USE_STL. Details (such that they are) are in +the makefile. + +In the tinyxml directory, type "make clean" then "make". The executable +file 'xmltest' will be created. + + + +

To Use in an Application:

+ +Add tinyxml.cpp, tinyxml.h, tinyxmlerror.cpp, tinyxmlparser.cpp, tinystr.cpp, and tinystr.h to your +project or make file. That's it! It should compile on any reasonably +compliant C++ system. You do not need to enable exceptions or +RTTI for TinyXML. + + +

How TinyXML works.

+ +An example is probably the best way to go. Take: +@verbatim + + + + Go to the Toy store! + Do bills + +@endverbatim + +Its not much of a To Do list, but it will do. To read this file +(say "demo.xml") you would create a document, and parse it in: +@verbatim + TiXmlDocument doc( "demo.xml" ); + doc.LoadFile(); +@endverbatim + +And its ready to go. Now lets look at some lines and how they +relate to the DOM. + +@verbatim + +@endverbatim + + The first line is a declaration, and gets turned into the + TiXmlDeclaration class. It will be the first child of the + document node. + + This is the only directive/special tag parsed by TinyXML. + Generally directive tags are stored in TiXmlUnknown so the + commands wont be lost when it is saved back to disk. + +@verbatim + +@endverbatim + + A comment. Will become a TiXmlComment object. + +@verbatim + +@endverbatim + + The "ToDo" tag defines a TiXmlElement object. This one does not have + any attributes, but does contain 2 other elements. + +@verbatim + +@endverbatim + + Creates another TiXmlElement which is a child of the "ToDo" element. + This element has 1 attribute, with the name "priority" and the value + "1". + +@verbatim +Go to the +@endverbatim + + A TiXmlText. This is a leaf node and cannot contain other nodes. + It is a child of the "Item" TiXmlElement. + +@verbatim + +@endverbatim + + + Another TiXmlElement, this one a child of the "Item" element. + +Etc. + +Looking at the entire object tree, you end up with: +@verbatim +TiXmlDocument "demo.xml" + TiXmlDeclaration "version='1.0'" "standalone=no" + TiXmlComment " Our to do list data" + TiXmlElement "ToDo" + TiXmlElement "Item" Attribtutes: priority = 1 + TiXmlText "Go to the " + TiXmlElement "bold" + TiXmlText "Toy store!" + TiXmlElement "Item" Attributes: priority=2 + TiXmlText "Do bills" +@endverbatim + +

Documentation

+ +The documentation is build with Doxygen, using the 'dox' +configuration file. + +

License

+ +TinyXML is released under the zlib license: + +This software is provided 'as-is', without any express or implied +warranty. In no event will the authors be held liable for any +damages arising from the use of this software. + +Permission is granted to anyone to use this software for any +purpose, including commercial applications, and to alter it and +redistribute it freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must +not claim that you wrote the original software. If you use this +software in a product, an acknowledgment in the product documentation +would be appreciated but is not required. + +2. Altered source versions must be plainly marked as such, and +must not be misrepresented as being the original software. + +3. This notice may not be removed or altered from any source +distribution. + +

References

+ +The World Wide Web Consortium is the definitive standard body for +XML, and their web pages contain huge amounts of information. + +The definitive spec: +http://www.w3.org/TR/2004/REC-xml-20040204/ + +I also recommend "XML Pocket Reference" by Robert Eckstein and published by +OReilly...the book that got the whole thing started. + +

Contributors, Contacts, and a Brief History

+ +Thanks very much to everyone who sends suggestions, bugs, ideas, and +encouragement. It all helps, and makes this project fun. A special thanks +to the contributors on the web pages that keep it lively. + +So many people have sent in bugs and ideas, that rather than list here +we try to give credit due in the "changes.txt" file. + +TinyXML was originally written by Lee Thomason. (Often the "I" still +in the documentation.) Lee reviews changes and releases new versions, +with the help of Yves Berquin, Andrew Ellerton, and the tinyXml community. + +We appreciate your suggestions, and would love to know if you +use TinyXML. Hopefully you will enjoy it and find it useful. +Please post questions, comments, file bugs, or contact us at: + +www.sourceforge.net/projects/tinyxml + +Lee Thomason, Yves Berquin, Andrew Ellerton +*/ diff --git a/src/external/tinyxml/tinyXmlTest.dsp b/src/external/tinyxml/tinyXmlTest.dsp new file mode 100644 index 0000000..bf4baf0 --- /dev/null +++ b/src/external/tinyxml/tinyXmlTest.dsp @@ -0,0 +1,92 @@ +# Microsoft Developer Studio Project File - Name="tinyXmlTest" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=tinyXmlTest - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "tinyXmlTest.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "tinyXmlTest.mak" CFG="tinyXmlTest - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "tinyXmlTest - Win32 Release" (based on "Win32 (x86) Console Application") +!MESSAGE "tinyXmlTest - Win32 Debug" (based on "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe + +!IF "$(CFG)" == "tinyXmlTest - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "tinyXmlTest___Win32_Release" +# PROP BASE Intermediate_Dir "tinyXmlTest___Win32_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "tinyXmlTest___Win32_Release" +# PROP Intermediate_Dir "tinyXmlTest___Win32_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c +# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /FR /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 ./Release/tinyxml.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "tinyXmlTest - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "tinyXmlTest___Win32_Debug" +# PROP BASE Intermediate_Dir "tinyXmlTest___Win32_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "tinyXmlTest___Win32_Debug" +# PROP Intermediate_Dir "tinyXmlTest___Win32_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c +# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "TUNE" /FR /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 ./Debug/tinyxmld.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "tinyXmlTest - Win32 Release" +# Name "tinyXmlTest - Win32 Debug" +# Begin Source File + +SOURCE=.\xmltest.cpp +# End Source File +# End Target +# End Project diff --git a/src/external/tinyxml/tinyXmlTest.vcproj b/src/external/tinyxml/tinyXmlTest.vcproj new file mode 100644 index 0000000..e32ecdf --- /dev/null +++ b/src/external/tinyxml/tinyXmlTest.vcproj @@ -0,0 +1,226 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/external/tinyxml/tinyXmlTestSTL.dsp b/src/external/tinyxml/tinyXmlTestSTL.dsp new file mode 100644 index 0000000..c4b1926 --- /dev/null +++ b/src/external/tinyxml/tinyXmlTestSTL.dsp @@ -0,0 +1,92 @@ +# Microsoft Developer Studio Project File - Name="tinyXmlTestSTL" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=tinyXmlTestSTL - Win32 Debug +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "tinyXmlTestSTL.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "tinyXmlTestSTL.mak" CFG="tinyXmlTestSTL - Win32 Debug" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "tinyXmlTestSTL - Win32 Release" (based on "Win32 (x86) Console Application") +!MESSAGE "tinyXmlTestSTL - Win32 Debug" (based on "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe + +!IF "$(CFG)" == "tinyXmlTestSTL - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "tinyXmlTestSTL___Win32_Release" +# PROP BASE Intermediate_Dir "tinyXmlTestSTL___Win32_Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "tinyXmlTestSTL___Win32_Release" +# PROP Intermediate_Dir "tinyXmlTestSTL___Win32_Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c +# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /D "TIXML_USE_STL" /FD /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 ./Release_STL/tinyxml_stl.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 + +!ELSEIF "$(CFG)" == "tinyXmlTestSTL - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "tinyXmlTestSTL___Win32_Debug" +# PROP BASE Intermediate_Dir "tinyXmlTestSTL___Win32_Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "tinyXmlTestSTL___Win32_Debug" +# PROP Intermediate_Dir "tinyXmlTestSTL___Win32_Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c +# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /D "TIXML_USE_STL" /D "TUNE" /FR /FD /GZ /c +# SUBTRACT CPP /YX +# ADD BASE RSC /l 0x409 /d "_DEBUG" +# ADD RSC /l 0x409 /d "_DEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept +# ADD LINK32 ./Debug_STL/tinyxmld_stl.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /debug /machine:I386 /pdbtype:sept + +!ENDIF + +# Begin Target + +# Name "tinyXmlTestSTL - Win32 Release" +# Name "tinyXmlTestSTL - Win32 Debug" +# Begin Source File + +SOURCE=.\xmltest.cpp +# End Source File +# End Target +# End Project diff --git a/src/external/tinyxml/tinyXmlTestSTL.vcproj b/src/external/tinyxml/tinyXmlTestSTL.vcproj new file mode 100644 index 0000000..482a5aa --- /dev/null +++ b/src/external/tinyxml/tinyXmlTestSTL.vcproj @@ -0,0 +1,225 @@ + + + + + + + + + + + + +