diff options
Diffstat (limited to 'gui/conf')
| -rw-r--r-- | gui/conf/niri.kdl | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/gui/conf/niri.kdl b/gui/conf/niri.kdl new file mode 100644 index 0000000..d20cb61 --- /dev/null +++ b/gui/conf/niri.kdl @@ -0,0 +1,375 @@ +spawn-at-startup "xwayland-satellite" + +environment { + QT_QPA_PLATFORM "wayland" + DISPLAY ":0" +} + +prefer-no-csd + +input { + keyboard { + xkb { + layout "de" + } + } + + touchpad { + tap + // dwt + // dwtp + // drag false + // drag-lock + natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "two-finger" + // disabled-on-external-mouse + } + + mouse { + // off + } + + trackpoint { + // off + // natural-scroll + // accel-speed 0.2 + // accel-profile "flat" + // scroll-method "on-button-down" + // scroll-button 273 + // middle-emulation + } +} + +// You can configure outputs by their name, which you can find +// by running `niri msg outputs` while inside a niri instance. +// The built-in laptop monitor is usually called "eDP-1". +// Find more information on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Outputs +// Remember to uncomment the node by removing "/-"! +/-output "eDP-1" { + // Uncomment this line to disable this output. + // off + + // Resolution and, optionally, refresh rate of the output. + // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>". + // If the refresh rate is omitted, niri will pick the highest refresh rate + // for the resolution. + // If the mode is omitted altogether or is invalid, niri will pick one automatically. + // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes. + mode "1920x1080@120.030" + + // You can use integer or fractional scale, for example use 1.5 for 150% scale. + scale 1 + + // Transform allows to rotate the output counter-clockwise, valid values are: + // normal, 90, 180, 270, flipped, flipped-90, flipped-180 and flipped-270. + transform "normal" + + // Position of the output in the global coordinate space. + // This affects directional monitor actions like "focus-monitor-left", and cursor movement. + // The cursor can only move between directly adjacent outputs. + // Output scale and rotation has to be taken into account for positioning: + // outputs are sized in logical, or scaled, pixels. + // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080, + // so to put another output directly adjacent to it on the right, set its x to 1920. + // If the position is unset or results in an overlap, the output is instead placed + // automatically. + position x=1280 y=0 +} + +// Settings that influence how windows are positioned and sized. +// Find more information on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Layout +layout { + gaps 8 + + // When to center a column when changing focus, options are: + // - "never", default behavior, focusing an off-screen column will keep at the left + // or right edge of the screen. + // - "always", the focused column will always be centered. + // - "on-overflow", focusing a column will center it if it doesn't fit + // together with the previously focused column. + center-focused-column "never" + + preset-column-widths { + proportion 0.33333 + proportion 0.5 + proportion 0.66667 + } + + // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between. + // preset-window-heights { } + + default-column-width { proportion 0.5; } + + focus-ring { + width 4 + active-color "#909636" + inactive-color "#161616" + } +} + +screenshot-path "~/screenshot_%Y_%m_%d_%H_%M_%S.png" + +// Animation settings. +// The wiki explains how to configure individual animations: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Animations +animations { + // Uncomment to turn off all animations. + // off + + // Slow down all animations by this factor. Values below 1 speed them up instead. + // slowdown 3.0 +} + +// Window rules let you adjust behavior for individual windows. +// Find more information on the wiki: +// https://github.com/YaLTeR/niri/wiki/Configuration:-Window-Rules + +// Work around WezTerm's initial configure bug +// by setting an empty default-column-width. +window-rule { + // This regular expression is intentionally made as specific as possible, + // since this is the default config, and we want no false positives. + // You can get away with just app-id="wezterm" if you want. + match app-id=r#"^org\.wezfurlong\.wezterm$"# + default-column-width {} +} + +// Open the Firefox picture-in-picture player as floating by default. +window-rule { + match app-id=r#"firefox$"# title="^Picture-in-Picture$" + open-floating true +} + +// Example: block out two password managers from screen capture. +// (This example rule is commented out with a "/-" in front.) +/-window-rule { + match app-id=r#"^org\.gnome\.World\.Secrets$"# + block-out-from "screen-capture" +} + +binds { + F1 { show-hotkey-overlay; } + + Mod+Return hotkey-overlay-title="Open Terminal" { spawn "kitty"; } + Mod+Shift+Return hotkey-overlay-title="Open Emacs" { spawn "emacsclient" "-c"; } + Mod+Space hotkey-overlay-title="Run an Application: rofi" { spawn "rofi" "-show" "combi"; } + Ctrl+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock" "--color" "#000000"; } + + XF86AudioRaiseVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; } + XF86AudioLowerVolume allow-when-locked=true { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; } + XF86AudioMute allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SINK@" "toggle"; } + XF86AudioMicMute allow-when-locked=true { spawn "wpctl" "set-mute" "@DEFAULT_AUDIO_SOURCE@" "toggle"; } + + Mod+O repeat=false { toggle-overview; } + + Mod+Shift+Q { close-window; } + + Mod+h { focus-column-left; } + Mod+j { focus-window-down; } + Mod+k { focus-window-up; } + Mod+l { focus-column-right; } + + Mod+Shift+h { move-column-left; } + Mod+Shift+l { move-column-right; } + Mod+Shift+j { move-window-down; } + Mod+Shift+k { move-window-up; } + + Mod+Home { focus-column-first; } + Mod+End { focus-column-last; } + Mod+Ctrl+Home { move-column-to-first; } + Mod+Ctrl+End { move-column-to-last; } + + //Mod+Shift+Left { focus-monitor-left; } + //Mod+Shift+Down { focus-monitor-down; } + //Mod+Shift+Up { focus-monitor-up; } + //Mod+Shift+Right { focus-monitor-right; } + //Mod+Shift+H { focus-monitor-left; } + //Mod+Shift+J { focus-monitor-down; } + //Mod+Shift+K { focus-monitor-up; } + //Mod+Shift+L { focus-monitor-right; } + + //Mod+Shift+Ctrl+Left { move-column-to-monitor-left; } + //Mod+Shift+Ctrl+Down { move-column-to-monitor-down; } + //Mod+Shift+Ctrl+Up { move-column-to-monitor-up; } + //Mod+Shift+Ctrl+Right { move-column-to-monitor-right; } + //Mod+Shift+Ctrl+H { move-column-to-monitor-left; } + //Mod+Shift+Ctrl+J { move-column-to-monitor-down; } + //Mod+Shift+Ctrl+K { move-column-to-monitor-up; } + //Mod+Shift+Ctrl+L { move-column-to-monitor-right; } + + // Alternatively, there are commands to move just a single window: + // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; } + // ... + + // And you can also move a whole workspace to another monitor: + // Mod+Shift+Ctrl+Left { move-workspace-to-monitor-left; } + // ... + + Mod+Down { focus-workspace-down; } + Mod+Up { focus-workspace-up; } + Mod+U { focus-workspace-down; } + Mod+I { focus-workspace-up; } + Mod+Shift+U { move-workspace-down; } + Mod+Shift+I { move-workspace-up; } + + Mod+Ctrl+Page_Down { move-column-to-workspace-down; } + Mod+Ctrl+Page_Up { move-column-to-workspace-up; } + Mod+Ctrl+U { move-column-to-workspace-down; } + Mod+Ctrl+I { move-column-to-workspace-up; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+Page_Down { move-window-to-workspace-down; } + // ... + + // You can bind mouse wheel scroll ticks using the following syntax. + // These binds will change direction based on the natural-scroll setting. + // + // To avoid scrolling through workspaces really fast, you can use + // the cooldown-ms property. The bind will be rate-limited to this value. + // You can set a cooldown on any bind, but it's most useful for the wheel. + Mod+WheelScrollDown cooldown-ms=150 { focus-workspace-down; } + Mod+WheelScrollUp cooldown-ms=150 { focus-workspace-up; } + Mod+Shift+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; } + Mod+Shift+WheelScrollUp cooldown-ms=150 { move-column-to-workspace-up; } + + Mod+WheelScrollRight { focus-column-right; } + Mod+WheelScrollLeft { focus-column-left; } + Mod+Ctrl+WheelScrollRight { move-column-right; } + Mod+Ctrl+WheelScrollLeft { move-column-left; } + + // Usually scrolling up and down with Shift in applications results in + // horizontal scrolling; these binds replicate that. + //Mod+Shift+WheelScrollDown { focus-column-right; } + //Mod+Shift+WheelScrollUp { focus-column-left; } + Mod+Ctrl+Shift+WheelScrollDown { move-column-right; } + Mod+Ctrl+Shift+WheelScrollUp { move-column-left; } + + // Similarly, you can bind touchpad scroll "ticks". + // Touchpad scrolling is continuous, so for these binds it is split into + // discrete intervals. + // These binds are also affected by touchpad's natural-scroll, so these + // example binds are "inverted", since we have natural-scroll enabled for + // touchpads by default. + // Mod+TouchpadScrollDown { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02+"; } + // Mod+TouchpadScrollUp { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.02-"; } + + // You can refer to workspaces by index. However, keep in mind that + // niri is a dynamic workspace system, so these commands are kind of + // "best effort". Trying to refer to a workspace index bigger than + // the current workspace count will instead refer to the bottommost + // (empty) workspace. + // + // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on + // will all refer to the 3rd workspace. + Mod+1 { focus-workspace 1; } + Mod+2 { focus-workspace 2; } + Mod+3 { focus-workspace 3; } + Mod+4 { focus-workspace 4; } + Mod+5 { focus-workspace 5; } + Mod+6 { focus-workspace 6; } + Mod+7 { focus-workspace 7; } + Mod+8 { focus-workspace 8; } + Mod+9 { focus-workspace 9; } + Mod+Shift+1 { move-column-to-workspace 1; } + Mod+Shift+2 { move-column-to-workspace 2; } + Mod+Shift+3 { move-column-to-workspace 3; } + Mod+Shift+4 { move-column-to-workspace 4; } + Mod+Shift+5 { move-column-to-workspace 5; } + Mod+Shift+6 { move-column-to-workspace 6; } + Mod+Shift+7 { move-column-to-workspace 7; } + Mod+Shift+8 { move-column-to-workspace 8; } + Mod+Shift+9 { move-column-to-workspace 9; } + + // Alternatively, there are commands to move just a single window: + // Mod+Ctrl+1 { move-window-to-workspace 1; } + + // Switches focus between the current and the previous workspace. + // Mod+Tab { focus-workspace-previous; } + + // The following binds move the focused window in and out of a column. + // If the window is alone, they will consume it into the nearby column to the side. + // If the window is already in a column, they will expel it out. + Mod+BracketLeft { consume-or-expel-window-left; } + Mod+BracketRight { consume-or-expel-window-right; } + + // Consume one window from the right to the bottom of the focused column. + Mod+Comma { consume-window-into-column; } + // Expel the bottom window from the focused column to the right. + Mod+Period { expel-window-from-column; } + + Mod+R { switch-preset-column-width; } + Mod+Shift+R { switch-preset-window-height; } + Mod+Ctrl+R { reset-window-height; } + Mod+F { maximize-column; } + Mod+Shift+F { fullscreen-window; } + + // Expand the focused column to space not taken up by other fully visible columns. + // Makes the column "fill the rest of the space". + Mod+Ctrl+F { expand-column-to-available-width; } + + Mod+C { center-column; } + + // Center all fully visible columns on screen. + Mod+Ctrl+C { center-visible-columns; } + + // Finer width adjustments. + // This command can also: + // * set width in pixels: "1000" + // * adjust width in pixels: "-5" or "+5" + // * set width as a percentage of screen width: "25%" + // * adjust width as a percentage of screen width: "-10%" or "+10%" + // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0, + // set-column-width "100" will make the column occupy 200 physical screen pixels. + Mod+Minus { set-column-width "-10%"; } + Mod+Equal { set-column-width "+10%"; } + + // Finer height adjustments when in column with other windows. + Mod+Shift+Minus { set-window-height "-10%"; } + Mod+Shift+Equal { set-window-height "+10%"; } + + // Move the focused window between the floating and the tiling layout. + Mod+V { toggle-window-floating; } + Mod+Shift+V { switch-focus-between-floating-and-tiling; } + + // Toggle tabbed column display mode. + // Windows in this column will appear as vertical tabs, + // rather than stacked on top of each other. + Mod+W { toggle-column-tabbed-display; } + + // Actions to switch layouts. + // Note: if you uncomment these, make sure you do NOT have + // a matching layout switch hotkey configured in xkb options above. + // Having both at once on the same hotkey will break the switching, + // since it will switch twice upon pressing the hotkey (once by xkb, once by niri). + // Mod+Space { switch-layout "next"; } + // Mod+Shift+Space { switch-layout "prev"; } + + Print { screenshot; } + Ctrl+Print { screenshot-screen; } + Alt+Print { screenshot-window; } + + // Applications such as remote-desktop clients and software KVM switches may + // request that niri stops processing the keyboard shortcuts defined here + // so they may, for example, forward the key presses as-is to a remote machine. + // It's a good idea to bind an escape hatch to toggle the inhibitor, + // so a buggy application can't hold your session hostage. + // + // The allow-inhibiting=false property can be applied to other binds as well, + // which ensures niri always processes them, even when an inhibitor is active. + Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; } + + // The quit action will show a confirmation dialog to avoid accidental exits. + Ctrl+Alt+Escape { quit; } + + // Powers off the monitors. To turn them back on, do any input like + // moving the mouse or pressing any other key. + Mod+Shift+P { power-off-monitors; } +} + +hotkey-overlay { + skip-at-startup +}
\ No newline at end of file |